Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

pool boiling with Heat Transfer Module

Posted 2010年3月24日 GMT-4 18:49 Heat Transfer & Phase Change 2 Replies

Reja Amatya
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Is it possible to simulate pool boiling analysis using just Heat Transfer Module? One example for boiling water that I could find online uses Chemical engineering module. I wanted to simulate the change in heat transfer coefficient as the water temperature rises.
2 Replies Last Post 2016年4月11日 GMT-4 14:37
COMSOL Moderator

Hello Reja Amatya

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Ketaki Kolhekar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年4月11日 GMT-4 14:06
I tried with heat transfer with phase change. It is not working. My temperature goes beyond boiling point. Let me know if you could do that. thanks!
I tried with heat transfer with phase change. It is not working. My temperature goes beyond boiling point. Let me know if you could do that. thanks!
Ketaki Kolhekar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年4月11日 GMT-4 14:37
try using phase field, it might work!
try using phase field, it might work!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content