Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Electric Displacement Field due to mechanical stress after cooldown
Posted 2014年1月31日 GMT-5 02:36 Geometry, Mesh, Studies & Solvers, Structural Mechanics Version 4.3a, Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I have a problem with a 3D simulation for my Ph.D. thesis. Therefore I would be very grateful if anyone could help me.
My model consists of a piezoelectric substrate, two insulating layers and some metallizations on top. To reduce the number of degrees of freedom and because of a double symmetry I only look at a quarter of the model, just to prevent running out of memory. The simulations will help me to understand the results of our fully measured sample, where we expect mechanical stress imposed by the top metallization to lead to an electric field as a result of the piezoelectric effect. There are three Thermal Expansion nodes to incorporate the three changes in temperature while sample fabrication and our measurement at 1K.
But every time the solver stops with:
Failed to find a solution.
The relative error (...) is greater than the relative tolerance.
Returned solution is not converged.
No matter what I'm trying, it's always the same error.
Could anyone please have a look to my mph-file and maybe give a solution statement?
Attachments:
Hello Andre Müller
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.