Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Symmetry in heat transfer with surface to surface radiation
Posted 2014年2月5日 GMT-5 15:19 Heat Transfer & Phase Change Version 4.3b 2 Replies
Please login with a confirmed email address before reporting spam
Hi Comsol Users,
I'm working on a 3D model with heat transfer and surface to surface radiation, in which I make use of symmetry and calculate only one quarter of the problem. So I choose symmetry and diffuse mirror at the cut surfaces. So far so good.
The issue is that I don't want to calculate heat transfer by conduction in the transparent domain in the model (Radiation is dominating over conduction). I have tried workarounds as setting thermal conductivity to zero in the transparent domain or simply leaving it unmeshed (with mesh at the mirror surface only) but it annoys me that there's no "clean" solution to it.
Have you dealt with such problem? How did you solve it ?
Best regards
--
______
Flanell
I'm working on a 3D model with heat transfer and surface to surface radiation, in which I make use of symmetry and calculate only one quarter of the problem. So I choose symmetry and diffuse mirror at the cut surfaces. So far so good.
The issue is that I don't want to calculate heat transfer by conduction in the transparent domain in the model (Radiation is dominating over conduction). I have tried workarounds as setting thermal conductivity to zero in the transparent domain or simply leaving it unmeshed (with mesh at the mirror surface only) but it annoys me that there's no "clean" solution to it.
Have you dealt with such problem? How did you solve it ?
Best regards
--
______
Flanell
2 Replies Last Post 2014年2月7日 GMT-5 06:41
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hello Flanell,
Surface to surface radiation desn't work with symmetry plane dixit Comsol hotline
Julien
Surface to surface radiation desn't work with symmetry plane dixit Comsol hotline
Julien
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Ok. Probably, thats why they did not simply call it symmetry cond. in rad.
Thank you Julien!
--
______
Flanell
Thank you Julien!
--
______
Flanell