Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
capacitive transducer, Harmonic Perturbation problem, output pressure
Posted 2014年3月5日 GMT-5 23:24 MEMS & Nanotechnology, Acoustics & Vibrations, MEMS & Piezoelectric Devices Version 4.3a 0 Replies
Please login with a confirmed email address before reporting spam
I'm trying to simulate a capacitive transducer to get the ultrasound with the vibratng membrane. In the begining I use 2D axial symmetry, MEMS module, Pressure Acoustic,Frequency Domain module to get the result.
But when I use 3D, MEMS and Pressure Acoustic,Frequency Domain module with the same boundaries conditions(because of the long time to run,I design a half model),I think it's right but Comsol told me that there is error just as bellow:
Failed to find a solution for the initial parameter.
Maximum number of segregated iterations reached.
Returned solution is not converged.
-Feature: Stationary Solver2(sol1/s2)
-Error:Failed to find a solution for the initial parameter.
BTW: for drive it, I set a Harmonic Perturbation on the terminal with the DC voltage. I think maybe there is something wrong with it. But It's OK in 2D,I don't know why.
So could anybody help me to solve it? Please help me if you have any ideas, thanks a lot in advance!
（my email: ascxw2008@gmail.com , hope to get any suggestions, email is OK !）
Hello Jason Cao
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.