Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to limit time step size, when time depend solver neglects Nyquist Theorem?

Posted 2014年3月17日 GMT-4 15:30 Version 4.4 3 Replies

Hans Gennerich
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have a boundary condition: Boundary Temperature varies as: 293.15[K] + sin(t/100[s]) * 1[K]

The Time Dependend Solver generates a time series beginning with
0,1,10,20,40,80,160,320,640,1280 ...
where the last time step obviously severely surpaces the Nyquist frequency limitation.
So it seems I have to set a limit for time steps manually.

How will I have to do that?

I attach a screen-shot of the problem

Attachments:

3 Replies Last Post 2014年3月18日 GMT-4 11:53
Hans Gennerich
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月18日 GMT-4 09:54
When I choose Study/Timed Dependent, there is no place to set a maximum time step size.
It needs one run, to let COMSOL generate a node "Solver Configuration". Opening this one I can dig deeper at: Study 1/Solver Configuration/Time Dependent Solver1/Maximum Step

But this option is only available after an initial faulty run, not during setting up the model for the first run. Correct?
When I choose Study/Timed Dependent, there is no place to set a maximum time step size. It needs one run, to let COMSOL generate a node "Solver Configuration". Opening this one I can dig deeper at: Study 1/Solver Configuration/Time Dependent Solver1/Maximum Step But this option is only available after an initial faulty run, not during setting up the model for the first run. Correct?
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月18日 GMT-4 11:29

You can always show the default solver by right clicking the study node and choose from the context menu.

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
You can always show the default solver by right clicking the study node and choose from the context menu. -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com
Hans Gennerich
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月18日 GMT-4 11:53
Thank You, Yes I found it now.
Thank You, Yes I found it now.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content