Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to set two conditions for one boundary condition(vector)?

Posted 2014年3月18日 GMT-4 09:23 Fluid & Heat, Modeling Tools & Definitions, Parameters, Variables, & Functions 5 Replies

Sepideh Ramezani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I want to define two conditions for one part of rectangular that I have in 2D (xz) and put two different value of pressure head in one boundary condition,
like Hp=0 if z>= - 0.5159m
and Hp=0.05159 if z< - 0.5159m
how is it possible to write these in one boundary condition?
Attached screen shot for better explanation

Attachments:

5 Replies Last Post 2014年3月20日 GMT-4 11:39
Sepideh Ramezani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月18日 GMT-4 09:47
I wrote expression in a way that I put the screenshot, But I confronted with this error,
I am new in comsol and I need your help.
Best
Sepideh
I wrote expression in a way that I put the screenshot, But I confronted with this error, I am new in comsol and I need your help. Best Sepideh
Magnus Ringh COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月19日 GMT-4 04:53
Hi,

Use the following expression:

0*(z>=- 0.5159)+0.05159*(z<- 0.5159)

or simpler just

0.05159*(z<- 0.5159)

Best regards,
Magnus Ringh, COMSOL
Hi, Use the following expression: 0*(z>=- 0.5159)+0.05159*(z
Sepideh Ramezani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月19日 GMT-4 08:59

Hi,

Use the following expression:

0*(z>=- 0.5159)+0.05159*(z<- 0.5159)

or simpler just

0.05159*(z<- 0.5159)

Best regards,
Magnus Ringh, COMSOL


Thanks for reply Magnus,
I tried with the first expression and I confronted with error in screen shot1, and then I tried with the second expression and I confronted with screen shot2.
I am new to comsol, therefore your comments will help me a lot.
Best,
Sepideh
[QUOTE] Hi, Use the following expression: 0*(z>=- 0.5159)+0.05159*(z
Magnus Ringh COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月20日 GMT-4 05:51
Hi again,

Could it be that none of your spatial coordinates is called z? Typically, in a 2D model, the spatial coordinate names are x and y.

Best regards,
Magnus Ringh, COMSOL
Hi again, Could it be that none of your spatial coordinates is called z? Typically, in a 2D model, the spatial coordinate names are x and y. Best regards, Magnus Ringh, COMSOL
Sepideh Ramezani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月20日 GMT-4 11:39
Thanks a lot it worked with "y", and I just defined one side of rectangle for two types of condition like this
(C1*(p<p1) + C2*(p>=p1)). C1 and C2 are conditions.
Hope it helps for others.
Sepideh
Thanks a lot it worked with "y", and I just defined one side of rectangle for two types of condition like this (C1*(p=p1)). C1 and C2 are conditions. Hope it helps for others. Sepideh

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content