Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Problems with Magnetic force

Posted 2014年4月2日 GMT-4 09:48 Low-Frequency Electromagnetics, Microfluidics Version 4.4 5 Replies

Patricia Z.
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi! I am new to COMSOL and I really need some help please.

I want to study an electromagnetic actuation system to guide magnetic microparticles in blood vessels. For that I used the AC/DC module to build some coils to generate a gradient magnetic field and then I used the Fluid Flow module to model the blood. The final goal is to use the Particle Tracing for Fluid Flow module to determine the trajectory and velocity of the particles when subjected to the magnetic force, however when I include the Magnetophoretic Force (already included in the module) nothing happens! There is no change in particle velocity.

As it can be read in COMSOL: “The Magnetophoretic Force causes motion of permeable particles toward regions where the magnetic field is stronger. The magnetophoretic force is applicable for particles which are charge neutral and have a different relative permeability than the background fluid.”

But even when I insert a high value of particle relative permeability (400000) nothing happens. I was expecting a change in particle velocity. I attach some pictures of my problem.

Maybe it's something pretty obvious, but I really need some help here. Thank you!

Best regards,
Patrícia

Attachments:

5 Replies Last Post 2016年6月29日 GMT-4 23:47
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年4月2日 GMT-4 10:59

Patricia,

the vessel is in the most homogeneous part of the field. You might try to place it at some location with a larger gradient.

Cheers
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Patricia, the vessel is in the most homogeneous part of the field. You might try to place it at some location with a larger gradient. Cheers Edgar -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com
Patricia Z.
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年4月2日 GMT-4 11:40
Thanks for the reply!
Unfortunately I already tried to place the vessel in many other locations. Also, I tried other types of coils achieving high gradients. It doesn’t matter what I do, it always ignores the existence of the magnetic field. I don’t understand what I’m doing wrong. Any other idea of what could be the problem?

Thank you very much
Thanks for the reply! Unfortunately I already tried to place the vessel in many other locations. Also, I tried other types of coils achieving high gradients. It doesn’t matter what I do, it always ignores the existence of the magnetic field. I don’t understand what I’m doing wrong. Any other idea of what could be the problem? Thank you very much
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年4月2日 GMT-4 14:04

Patricia,

I am sorry, I don't have the Particle Tracing and Flow modules. So I can't comment on that part.

Good luck,
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Patricia, I am sorry, I don't have the Particle Tracing and Flow modules. So I can't comment on that part. Good luck, Edgar -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com
Ion Quintana
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年4月4日 GMT-4 02:32
Patricia,

Can you attach the model to have a look?

Regards,

Ion
Patricia, Can you attach the model to have a look? Regards, Ion
Tuan-Anh Le
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年6月29日 GMT-4 23:47
I think that the problem is magnetic field gradient. It didn't exist in tracking model. My simulation is the same. If you can solve, plz help us.
Thanks
I think that the problem is magnetic field gradient. It didn't exist in tracking model. My simulation is the same. If you can solve, plz help us. Thanks

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content