Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Mutual impedance (inductance) between two parallel conductors
Posted 2014年6月22日 GMT-4 04:16 Low-Frequency Electromagnetics Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I would like to find mutual impedance (inductance) between two parallel ac current-carrying conductors (60 Hz). I used mutual_inductance.mph from model library as a guide, however, it is for 2D axisymmetric and circular coils. I found mutual inductance using L12 = mf.VCoil_2/I1/mf.iomega. But I want to verify the result by other two ways shown in the AC/DC Model Library Manual pp 283-284 (line integral of the magnetic flux density and integral of the magnetic vector potential over entire cross section of the conductor). My model is 2D and consists of two conductors separated by a distance. If there are other ways to compute mutual impedance (inductance) between two parallel conductors, please let me know.
Regards,
Akim
Hello Akim Borbuev
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.