Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Apply AC voltage to a Electrostatic model
Posted 2014年7月3日 GMT-4 16:08 Low-Frequency Electromagnetics Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Hello Community,
In my model I have 3 metal ring in the air. I need to apply a 3 phase voltage sine wave to these rings. (each ring is connected to each phase). each phase has 120 degree phase shift. I've already created a electrostatic 3D model and simulate electric field in DC situation and works well. My problem is that I don't know how should I apply AC voltage to these rings. Any suggestion?
In my model I have 3 metal ring in the air. I need to apply a 3 phase voltage sine wave to these rings. (each ring is connected to each phase). each phase has 120 degree phase shift. I've already created a electrostatic 3D model and simulate electric field in DC situation and works well. My problem is that I don't know how should I apply AC voltage to these rings. Any suggestion?
1 Reply Last Post 2014年7月4日 GMT-4 08:08
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
AC voltage is no longer electrostatic. There will be time dependent electric fields which in turn make (by the Maxwell equations) for a time dependent magnetic field which in turn influence the electric fields and so forth. So you will need electromagnetics physics instead of electrostatics.