Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Selecting results from different piezos in same setup
Posted 2014年7月17日 GMT-4 09:38 MEMS & Nanotechnology, Piezoelectric Devices, Acoustics & Vibrations, Results & Visualization Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I have a 2D model with three piezos attached to the same chamber, where I produce a gaussian explosion.
I want to study how the different position of the piezos affects the sound pick-up, therefore I would like to see the voltage induced in each of the three piezo independently.
However, when I try to plot the results (1D Plot Group -> Line Graph) for the floating potential at the piezo interface, selecting each time a different piezo, I get always the same plot. I also tried to select one of the walls of the piezo that I had set as "No charge" and still I get the same results, so I don't know what I'm plotting.
I could attach my model if it helps.
UPDATE: I plotted the total displacement instead of the floating voltage and I get different plots for different piezos' interface, so the problem is with the floating pot.
Hello Giacomo Caria
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.