Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to apply the heat flux on the phase change inerface?

Posted 2014年8月1日 GMT-4 00:51 Version 4.3b 0 Replies

Xu Hebing
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

dear all

I am simlating the laser ablation process. During the process, the material is evaporated when the temperature is above the evaporation point. The laser irradation must remain on the interface of solid/vapor phases. So how to apply the heat flux on the phase change inerface?

thanks for your reply!
0 Replies Last Post 2014年8月1日 GMT-4 00:51
COMSOL Moderator

Hello Xu Hebing

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content