Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
transport of diluted species and laminar flow
Posted 2014年8月3日 GMT-4 21:36 Fluid & Heat, Chemical Reaction Engineering, Studies & Solvers Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I want to simulate a cylinder moving in the water, and it can generate some species on the bottom of the cylinder. So the move of the cylinder will influence the transportation of the diluted species. I set the moving wall boundary condition to the outer surface of the cylinder, but when i set the magnitude of the velocity too big, there is an error says"failed to find a solution. Maximum number of newton iterations reached, returned solution is not conberged"
can anybody help me, thanks a lot!
Attachments:
Hello Guo Shusen
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.