Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
need help
Posted 2014年8月20日 GMT-4 14:21 Low-Frequency Electromagnetics, Geometry, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
hi I want to simulate magnetic field around a multi turn coil with different core shapes. please help mee
1 Reply Last Post 2014年8月27日 GMT-4 07:07
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
A good starting point for modelling fields from multi turn coils is given in the following:
www.comsol.com/model/single-turn-and-multi-turn-coil-domains-in-3d-14067
If the models you want to run are stationary, then the above should be all you need. If you are looking at time dependant models, there are a few other considerations that need to be made. I am far from an expert, but will try and help if you have further questions!
www.comsol.com/model/single-turn-and-multi-turn-coil-domains-in-3d-14067
If the models you want to run are stationary, then the above should be all you need. If you are looking at time dependant models, there are a few other considerations that need to be made. I am far from an expert, but will try and help if you have further questions!