Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Suspended Core Fiber
Posted 2014年10月12日 GMT-4 09:01 Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Hope all of you are fine. I want to work with suspended core Fiber for liquid sensing applications. But i could not understand, how can it be possible to design Suspended core fiber (three hole- please see the attached photo) by using geometry in Comsol Multiphysics 4.4 . I have tried many times to design by using Bezier Polygon, but it look not like that. Someone who have already worked with SCF by using Comsol, can suggest me how can it be possible. If possible please help me.
Best Regrads
Attachments:
Hello Kamal Khan
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
I also have the same problem. I don't know how create this structure in COMSOL . If you have some idea please let me know. Maybe we can work together and help each other with this issue ?
I have also different kind of problem . I simulate SMF(Single Mode Fiber) (because my bio-sensor will be fusion of this two fiber structure ) . I have problem with simulation. If i give some initial value after simulation I always have E equal zero in very direction. Do you have any suggestion what can caused this problem??
Regards Piotr