Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Problem in Optimization by global least squares objective

Posted 2014年12月9日 GMT-5 14:44 Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.3 0 Replies

Makram Obied
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi sirs, that is my first contribution in COMSOL discussion forum. I'm simulating an adsorption process of water vapour in silica gel grains. the model is working very good when I enter fixed value of mass diffusion coefficient. But, when I use the optimization module (global least squares objective) to extract the best value of the diffusion coeff to do good fitting to the simulation results with my experimental data , I got very bad fitting and optimized value of the diffusion coeff equal to the intial value which I enterd in the optimization module (No optimization occurred). My research stopped due to this problem, please help me.
0 Replies Last Post 2014年12月9日 GMT-5 14:44
COMSOL Moderator

Hello Makram Obied

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content