Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Charge accumulation

Posted 2015年1月8日 GMT-5 07:13 Low-Frequency Electromagnetics, Plasma Physics, Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.4 1 Reply

Igor Liubarsky
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

We want to simulate charge accumulation on a surface. The surface has a penetrating electric field on in and there is a non trivial charge density outside the surface. As the charges accumulate on the surface they will change the electric field until the field becomes parallel to the surface at which point charge accumulation should stop.

But how to do this?

We would be grateful for any hits how to proceed. Also if there is a existing COMSOL model that can do this or something similar.

Thank you in advance.
1 Reply Last Post 2015年1月8日 GMT-5 08:35
Daniel Smith COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2015年1月8日 GMT-5 08:35
This is the operating principle of a dielectric barrier discharge (DBD). There is an example in the Plasma Module Model Library:

www.comsol.com/model/dielectric-barrier-discharge-8637

Dan
This is the operating principle of a dielectric barrier discharge (DBD). There is an example in the Plasma Module Model Library: http://www.comsol.com/model/dielectric-barrier-discharge-8637 Dan

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content