Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
RF + Optimization module
Posted 2015年2月2日 GMT-5 05:10 RF & Microwave Engineering, Optimization Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I want to use the optimization module to optimize the geometrical parameters of a waveguide. After each iteration, a merit function defined as the difference between the effective index of the first two calculated modes [i.e. emw.neff(1) - emw.neff(2) ] shall be calculated.
Do you know how can I define this merit function?
Thanks
I want to use the optimization module to optimize the geometrical parameters of a waveguide. After each iteration, a merit function defined as the difference between the effective index of the first two calculated modes [i.e. emw.neff(1) - emw.neff(2) ] shall be calculated.
Do you know how can I define this merit function?
Thanks
1 Reply Last Post 2015年2月2日 GMT-5 11:08
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Hello Felipe,
I am not an expert in your engineering field, but from the looks of it this seems like a job for the with() operator. See Reference Manual, version 4.4, page 220 (or version 5.0, page 229).
Best,
Jeff
I am not an expert in your engineering field, but from the looks of it this seems like a job for the with() operator. See Reference Manual, version 4.4, page 220 (or version 5.0, page 229).
Best,
Jeff