Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modelling for EM Radiation Simulation

Posted 2015年3月17日 GMT-4 12:07 Low-Frequency Electromagnetics, RF & Microwave Engineering Version 4.3, Version 4.4 0 Replies

Xiang Juan Kho
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am a new user and currently self-learning the software. The guide on "Connecting a 3D Electromagnetic Wave Model to an Electrical Circuit" provided in the model gallery has been a tremendous help to me in my studies of transmission line radiation. However, I'd like to simulate the external electric and magnetic fields radiated by the 3D cable (connect to a circuit) rather than inside the cable as demonstrated.

I have tried to model it based on other guides but to no avail. Any model file, tutorial or advice on the matter is highly appreciated.

Thanks.
0 Replies Last Post 2015年3月17日 GMT-4 12:07
COMSOL Moderator

Hello Xiang Juan Kho

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content