Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Chemical Reaction Engineering problem: concentration of products is too high

Posted 2015年3月31日 GMT-4 08:36 Chemical Reaction Engineering Version 4.4 3 Replies

Mika Haber
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everyone

I guess I have a simple problem but I don't know what I'm doing wrong.

When I've got a simple reaction, sth like:

x => 2z

and I enter an inital value for the concentration of x=1 mol/m^3, I have the following problem:
When comsol plots the concentration over time I get a maximal concentration of 2 mol/m^3 for z but that's impossible. The concentration of the product can't be higher than the concentration of the reagant.

How can I fix this?

Thanks for the help
3 Replies Last Post 2015年3月31日 GMT-4 11:30
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2015年3月31日 GMT-4 09:07
Yes it can, you have the stoichiometric coefficient 2, i.e. each x produces 2 z.
Yes it can, you have the stoichiometric coefficient 2, i.e. each x produces 2 z.
Mika Haber
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2015年3月31日 GMT-4 09:48
Hi Lasse,

thank you for your reply.

I think I had an understanding problem. I thought the maximum concentration could only be 1 mol/m^3 if thats the concentration of the reagent. But it makes sense, that the concentration of z is 2 times because for 1 molecule x there will be two z, if I understood it correctly.

I appreciate your help.

br
Hi Lasse, thank you for your reply. I think I had an understanding problem. I thought the maximum concentration could only be 1 mol/m^3 if thats the concentration of the reagent. But it makes sense, that the concentration of z is 2 times because for 1 molecule x there will be two z, if I understood it correctly. I appreciate your help. br
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2015年3月31日 GMT-4 11:30
Mass of the material does not naturally change, but in chemistry we are counting mols that are not absolute in the sense that when talking about them you have to define which compound you are talking about. Yet, mol is needed because substances react in integer ratios of mols.
Mass of the material does not naturally change, but in chemistry we are counting mols that are not absolute in the sense that when talking about them you have to define which compound you are talking about. Yet, mol is needed because substances react in integer ratios of mols.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content