Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Pulsed Radiofrequency
Posted 2015年6月11日 GMT-4 15:20 Low-Frequency Electromagnetics, RF & Microwave Engineering, Heat Transfer & Phase Change Version 5.0 0 Replies
Please login with a confirmed email address before reporting spam
I tried remaking this tutorial and it worked properly.
www.comsol.com/video/video-373
However, the ablation is going through a continuous source and not a pulsed radiofrequency source.
I'm new to COMSOL and I'm wondering how to make a pulsing RF generator?
The frequency would be 500 kHz and the pulse lasts 20 msec. There are two pulses every second. So there would be one 20 msec pulse, 480 msec of nothing applied, another 20 msec pulse, and another 480 msec of nothing applied and the cycle starts over on the next second.
The study I would be doing is testing the change in temperature of the surrounding tissue when heat is transferred from the RF source.
If anyone knows how to simulate this, that'd be great!
Hello Kavya Cherukuri
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.