Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Define a maximum/minimum Concentration
Posted 2015年6月15日 GMT-4 12:53 Chemical Reaction Engineering, Parameters, Variables, & Functions Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I try to define a maximum and minimum concentration, but it doesn´t work like i want.
I hve a simple model. Attached is a picture of it. Two domains which are separated threw a thin diffusion layer. At the ground is a outward flux.
In the upper domain I want a constant concentration of "c_air" (I assume a big room thus the concentration doesn´t decrease). And in the other domain I want a initial concentration of "c_liquid" which doesn´t increase the initial value. I tried the max/min functions but without a success. I typed for example "min(c,c_liquid)" in the "initial values"-field. But then Comsol uses as initial value something round about zero, but it seems that the maximum value is c_liquid.
Does somebody have suggestions what I´m doing wrong? Or how to define a maximum or minimum concentration at another point?
Thanks and best regards,
Adnan
Attachments:
Hello Adnan Brkic
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.