Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How do i find the centre of mass in a circular shape on COMSOL?

Posted 2015年7月5日 GMT-4 04:16 Low-Frequency Electromagnetics, Fluid & Heat, Interfacing, Geometry, Mesh Version 4.4, Version 5.0, Version 5.1 2 Replies

Onyekachukwu Nnodim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I have a circle of radius 40mm extruded to a height of 4mm and divided into 8 equal parts or domains.

1. How do I retrieve the (centre of mass) for this shape on COMSOL?

2. How do i know the x, y and z coordinates of any point in this shape on COMSOL?

Thanks
2 Replies Last Post 2015年7月6日 GMT-4 09:59
Daniel Smith COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年7月6日 GMT-4 09:05
Hi Onyekachukwu, you can simply go to Component 1>Definitions>Mass Properties. This will add a feature which computes the mass, volume, center of mass and other variables for the domains or boundaries you select.
Hi Onyekachukwu, you can simply go to Component 1>Definitions>Mass Properties. This will add a feature which computes the mass, volume, center of mass and other variables for the domains or boundaries you select.
Onyekachukwu Nnodim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年7月6日 GMT-4 09:59
Dear Smith,

Thank you so much, this helped a lot but...

Attached is a picture of my model and those sensitive regions have coordinates;

1. I would like to know where to read the values of the centre of mass.

2 Also be able to read the x,y,z coordinates of those sensitive regions like the second photo attached.

Thanks tons.


Hi Onyekachukwu, you can simply go to Component 1>Definitions>Mass Properties. This will add a feature which computes the mass, volume, center of mass and other variables for the domains or boundaries you select.


Dear Smith, Thank you so much, this helped a lot but... Attached is a picture of my model and those sensitive regions have coordinates; 1. I would like to know where to read the values of the centre of mass. 2 Also be able to read the x,y,z coordinates of those sensitive regions like the second photo attached. Thanks tons. [QUOTE] Hi Onyekachukwu, you can simply go to Component 1>Definitions>Mass Properties. This will add a feature which computes the mass, volume, center of mass and other variables for the domains or boundaries you select. [/QUOTE]

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content