Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Livelink Matlab. Running processed data back to comsol
Posted 2015年7月14日 GMT-4 14:03 Interfacing, Materials, Parameters, Variables, & Functions, Studies & Solvers Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Is there an straight forward way to send modified meshed data back to comsol after processing it with Matlab?
Let me explain. I am reading a certain variable from a domain, from study 1. Using the data of each point of the grid, I calculated the effect over an specific set of variables. I want to send this variables back to Comsol for study2.
I know is possible to do it in one go with Comsol, but only when you have one result from the previous study. But I am making a scan over 3 parameters and selecting a certain type of eigenmodes per combination. Which I do via Matlab since I could not find a way to do it with Comsol.
After the selection, I want to run a second study for each case.
Do I make any sense?
By the way, I am not changing the grid. And I am taking the values via mpheval()
Many thanks in advance for any help or suggestions.
Hello Marco Porcel
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam