Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Young's modulus E from Matweb.com

Posted 2015年7月21日 GMT-4 03:25 Materials Version 5.0 0 Replies

Thomas Bender
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello @ all,

I would like to perform a modal analysis of an artificial bone (Cylinder), I have found the material parameters at MatWeb.

www.matweb.com/search/DataSheet.aspx?MatGUID=f7a64cd5a3534bf0a85d836da650f022

Density: 0.160 [g/cm^3]
Poissons ratio: 0.30
Young's modulus: 86[MPa] --> Tensile Modulus 0.0860 GPa

is that correct? Because the simulated values do not match with the real measurements ;(

Thank you for your help,

Thomas
0 Replies Last Post 2015年7月21日 GMT-4 03:25
COMSOL Moderator

Hello Thomas Bender

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content