Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Duplicate Operator name
Posted 2010年8月18日 GMT-4 11:22 1 Reply
Please login with a confirmed email address before reporting spam
Hi
I'm a new user of COMSOL, trying to learn how to use it.
I am working on stress analyses of ceramic dental crowns submitted to loading.
I made a 2D model of a simplified crown consisted in 3 parts (cement, core and veneer), and other part (piston) to apply the load.
Also, I would like to include thermal expansio of two parts - core and veneer.
The problem is that when I started the simulation an error appeard:
Error: 6268
Duplicate operator name
- Name: mst2slv_cp1
I don't know what kind of error this is, and how to solve the problem. Can anybody help me?
Thanks in advance,
Paula
I'm a new user of COMSOL, trying to learn how to use it.
I am working on stress analyses of ceramic dental crowns submitted to loading.
I made a 2D model of a simplified crown consisted in 3 parts (cement, core and veneer), and other part (piston) to apply the load.
Also, I would like to include thermal expansio of two parts - core and veneer.
The problem is that when I started the simulation an error appeard:
Error: 6268
Duplicate operator name
- Name: mst2slv_cp1
I don't know what kind of error this is, and how to solve the problem. Can anybody help me?
Thanks in advance,
Paula
1 Reply Last Post 2010年8月18日 GMT-4 13:12
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
For me it looks like you are using contact pairs (which I'm not sure you really need, at least not to start with) and that these are not fully defined.
I would not use "assembly" mode, and use standard continuous boundaries between the parts.
--
Good luck
Ivar
For me it looks like you are using contact pairs (which I'm not sure you really need, at least not to start with) and that these are not fully defined.
I would not use "assembly" mode, and use standard continuous boundaries between the parts.
--
Good luck
Ivar