Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
node numbering
Posted 2010年9月7日 GMT-4 20:54 1 Reply
Please login with a confirmed email address before reporting spam
Does anyone know in what order the nodes are numbered in a mapped mesh in COMSOL, or where in the documentation node numbering conventions are explained?
I would like to do some post processing using the stiffness matrix, but can't figure which entry corresponds to which degree of freedom.
Thanks for the help!
I would like to do some post processing using the stiffness matrix, but can't figure which entry corresponds to which degree of freedom.
Thanks for the help!
1 Reply Last Post 2010年9月8日 GMT-4 01:35
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I have never found that in the doc, but you can learn by starting with simple examples.
I mostly define groups in the GUI and then resolve the group indexes to identify the nodes, it was somewhat heavy but possible in 3.5 (there are several discussions and some code here try a search on the forum) . Still have to redo all this in V4 ;)
--
Good luck
Ivar
I have never found that in the doc, but you can learn by starting with simple examples.
I mostly define groups in the GUI and then resolve the group indexes to identify the nodes, it was somewhat heavy but possible in 3.5 (there are several discussions and some code here try a search on the forum) . Still have to redo all this in V4 ;)
--
Good luck
Ivar