Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Dielectric Loss in RF transient simulation
Posted 2015年10月20日 GMT-4 14:21 RF & Microwave Engineering, Materials Version 5.1 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I am trying to simulate a dielectric with losses in an RF transient (temw) simulation in Comsol 5.1.
When doing frequency-domain simulations (emw), I set the permittivity of the material to be εr-j*εr*tanδ.
How would I go about this in a transient simulation? I presume I need to create an ODE for Comsol to solve, but I don't know what that ODE should be.
Thank you,
Nicholas
I am trying to simulate a dielectric with losses in an RF transient (temw) simulation in Comsol 5.1.
When doing frequency-domain simulations (emw), I set the permittivity of the material to be εr-j*εr*tanδ.
How would I go about this in a transient simulation? I presume I need to create an ODE for Comsol to solve, but I don't know what that ODE should be.
Thank you,
Nicholas
1 Reply Last Post 2015年10月21日 GMT-4 08:59
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi Nickolas,
I would suggest you contact COMSOL technical support at support@comsol.com. It is the official technical support database run by COMSOL. You are of course more than welcome to start discussion with other users on the forum.
Best regards,
Mao
I would suggest you contact COMSOL technical support at support@comsol.com. It is the official technical support database run by COMSOL. You are of course more than welcome to start discussion with other users on the forum.
Best regards,
Mao