Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Adding Catalyst in Li Ion battery model
Posted 2015年12月1日 GMT-5 10:11 Battery Design Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I am new to comsol 4.3a and I want to add a catalyst layer around electrodes. i would like to begin with adding catalyst layer in existing tutorial model and understand the changes to begin with. What is the best method to do so?
link to Tutorial model: www.comsol.com/model/2d-lithium-ion-battery-9981
I am new to comsol 4.3a and I want to add a catalyst layer around electrodes. i would like to begin with adding catalyst layer in existing tutorial model and understand the changes to begin with. What is the best method to do so?
link to Tutorial model: www.comsol.com/model/2d-lithium-ion-battery-9981
1 Reply Last Post 2015年12月4日 GMT-5 08:50
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Dear Achyut,
COMSOL's official support database can be reached at support@comsol.com. In the meantime, if you haven't checked out this blog:
www.comsol.com/blogs/pem-fuel-cell-modeling-examples/
Hope this is helpful!
Best wishes,
Mao Mao, PhD
COMSOL's official support database can be reached at support@comsol.com. In the meantime, if you haven't checked out this blog:
www.comsol.com/blogs/pem-fuel-cell-modeling-examples/
Hope this is helpful!
Best wishes,
Mao Mao, PhD