Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Predefined announced variables give zero results
Posted 2015年12月8日 GMT-5 17:46 Fluid & Heat, Acoustics & Vibrations, Microfluidics, Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers, Structural Mechanics Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
I am working on the formation of ultrasonic-standing wave using a piezoelectric device acting on a fluid domain which contains suspended particles that is surrounded by PMMA walls.
I have 3 domains and 4 physics:
Transducer domain - piezoelectric device physics
PMMA domain - structural mechanics physics
Fluid domain - pressure acoustics + euler model physics
On the boundary load condition of PMMA wall structural mechanics I used an acoustic load per unit area (acpr/pam1).
On the normal acceleration boundary condition, I used Acceleration (solid/lemm1).
While computing it, it gave me zero results, why is that?
Thanks.
Attachments:
Hello Badri Suhaini
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.