Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

axial symmetry in general form PDE

Posted 2015年12月8日 GMT-5 20:19 Chemical Reaction Engineering, Materials, Parameters, Variables, & Functions 3 Replies

Yuhong Chen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I have built a 2D axisymmetry model with general form PDE to solve mass transport, but I cannot set the axial symmetry boundary since there is no such option, even for the zero flux the symmetrical boundary 3 is not applicable as the following picture shows. Is this boundary condition default with no need for setting? I'll appreciate it if anyone konws about this problem.

Attachments:

3 Replies Last Post 2015年12月9日 GMT-5 07:18
Pu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年12月9日 GMT-5 03:24
This is a nasty part in COMSOL... I couldn't find it anywhere.

--
Pu, ZHANG
DTU Fotonik
This is a nasty part in COMSOL... I couldn't find it anywhere. -- Pu, ZHANG DTU Fotonik
Yuhong Chen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年12月9日 GMT-5 05:14
Hi Pu,

Thanks for your prompt reply. My simulation can be carried out even without setting this axial boundary condition. But the result seems not so correct so I want to confirm whether it matters or not. Do you know about its influence or just default setting, or is there any other substitution for it?

Yuhong
Hi Pu, Thanks for your prompt reply. My simulation can be carried out even without setting this axial boundary condition. But the result seems not so correct so I want to confirm whether it matters or not. Do you know about its influence or just default setting, or is there any other substitution for it? Yuhong
Pu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年12月9日 GMT-5 07:18
Nope... I don't know the solution yet.

--
Pu, ZHANG
DTU Fotonik
Nope... I don't know the solution yet. -- Pu, ZHANG DTU Fotonik

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content