Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to put in series fuel cells

Posted 2015年12月21日 GMT-5 04:05 Battery Design Version 4.3 0 Replies

Marco Lippolis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everybody,
I have builted a model based on the Comsol Battery & Fuel Cells Module/PEMFC/ht_pem example.

In my model I would like to put several cells in serie, but i don't know how to do it.
The example model grounds the anode side of the cell and set the cathode side to the cell potential, but I cannot do this for my 10 anodes and 10 cathods.

Can you help me, please?

Thanks!
Marco
0 Replies Last Post 2015年12月21日 GMT-5 04:05
COMSOL Moderator

Hello Marco Lippolis

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content