Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Transport in diluted species

Please login with a confirmed email address before reporting spam

Hi,
I a modeling a time dependent mass transfer from a sphere into a fluid flowing past it in a cylindrical pipe.
Now when I am measuring the concentration at a particular point in the fluid, initially my concentration is becoming negative.
Can you help me with why this is happening?
Please see the attachment.


1 Reply Last Post 2016年2月5日 GMT-5 09:31

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年2月5日 GMT-5 09:31
Hi

Your values are practically zero, of the order of 1e-15. I would not bother. The issue of negative concentrations is repeatedly discussed in this forum. Please check them

Lasse
Hi Your values are practically zero, of the order of 1e-15. I would not bother. The issue of negative concentrations is repeatedly discussed in this forum. Please check them Lasse

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.