Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Diffusion with Langmuir Adsorption
Posted 2010年10月25日 GMT-4 05:01 0 Replies
Please login with a confirmed email address before reporting spam
I have been using Comsol4.0a to model diffusion with adsorption through a porous medium. I have used a sink term in the normal diffusion equation to represent the adsorption to the surfaces of the medium, and rearranged to incorporate this into the diffusion coefficient like so:
dc/dt = D/(1+KG/(1-Kc)^2) Del^2(c)
where G is the number of absorbing sites and K is the adsorption coefficient. In a 3D model I am concerned that the diffusion will be slowed too much by this term, as the value for D in Comsol is accounted for seperately in each direction (which I found when looking in equation view). Any information on how Comsol uses these parameters would be useful as If this is the case I will need to reconsider how I account for adsorption.
Hello Christopher White
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.