Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

3D plasma discharge

Posted 2016年4月4日 GMT-4 21:44 2 Replies

国鉴 牛
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all:

I am trying to simulate a 3D microwave plasma discharge. I would be very happy if someone could offer an example on how to tackle the problem.

Thank you very much in advance,

Best regards

Guo-jian Niu
2 Replies Last Post 2016年10月27日 GMT-4 03:16
Zhou Jack
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年4月5日 GMT-4 02:28
There are some applications availble in the app lib in COMSOL. May that be helpful to you.
There are some applications availble in the app lib in COMSOL. May that be helpful to you.
Majida Wreikat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年10月27日 GMT-4 03:16
Hello Guo jian niu ;

I recommend u to start with 2D or 2D axi-symmetric first. since the problem you are trying to solve is had enough for 2D .
then u can do a 3D revolve from the results node.

Best of Luck
Hello Guo jian niu ; I recommend u to start with 2D or 2D axi-symmetric first. since the problem you are trying to solve is had enough for 2D . then u can do a 3D revolve from the results node. Best of Luck

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content