Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Please Help! Electrical simulation problem
Posted 2016年4月29日 GMT-4 10:25 Low-Frequency Electromagnetics Version 5.2 0 Replies
Please login with a confirmed email address before reporting spam
I have a problem with an electrical model.
My model is a nerve (a simple cylinder made of three different materials) with two electrodes situated on the surface of the nerve. One of these is the ground and the other one is the stimulating electrode. The simulation works and there aren't errors, but the distribution of the electric potential is not as I would have expected. The distribution is symmetrical but I would expect a higher potential towards the stimulating electrode, without a so big influence of the ground electrode. This is the first time I use comsol for electrical models, so I don't know what's the problem. I think that there could be problems with the definition of the physics (for example the boundaries conditions) or with the characteristics of the materials.
Thanks in advance to anyone who can help me.
Hello Floriana Guido
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.