Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to use the pervious layer boundary condition?

Please login with a confirmed email address before reporting spam

What's the difference between pervious layer and hydraulic head boundary condition? I tried this two kind of boundary condition to simulate a filter cake on the soil surface. the thickness of filter cake is 35 mm, the hydraulic conductivity of filter cake is 1E-6 m/s. Firstly, I used pervious layer boundary condition to simulate a filter cake, and the conductance is2.85E-5 s^-1. Then I created a rectangle with width of 35 mm to simulate a filter cake, and add hydraulic head boundary condition to the side of this narrow rectangle. The results of two boundary condition is quite different, the pressure of hydraulic head boundary condition is larger than pervious layer boundary condition. I think the results is weird, because the results of two boundary condition should be same. And why?
Thank you.


0 Replies Last Post 2016年6月9日 GMT-4 23:06
COMSOL Moderator

Hello Hsinshen Yin

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.