Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

singularity problem in 3d cylinder

Please login with a confirmed email address before reporting spam


hi I m supposed to simulate two-phase laminar flow problem (moving mesh).

the size of a cyl is ,
r=5 h=5
The bottom of the cylinder is fixed and the top of the cylinder is moving with a certain speed in normal direction.
the side face of the cyl. is exposed to the air.

geometry
cyl : r=5 h=5
physics
wall at h=0 : no silp and predescribed mesh velocity =0
wall at h=5 : moving wall u=0.01 m/s and predescribed mesh velocity=0.01m/s
external fluid interface


remeshing fulfilled for initial time. or last time step of newton method is not converged.
singularity problem..etc





0 Replies Last Post 2016年6月10日 GMT-4 00:42
COMSOL Moderator

Hello Seung Hui Kim

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.