Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
resistance simulation
Posted 2010年11月25日 GMT-5 06:51 2 Replies
Please login with a confirmed email address before reporting spam
Hi Guys,
Here I am with a very basic problem based on under standing the models, boundary condition and sub domain settings.
I want to simulate a simple semiconductor resistor and measure the I-V characteristics. the attached fig sows the arrangement. Guys please suggest the model, boundary conditions and the sub domain settings. Do I need the convection diffusion model?
Please guys some thoughts on this.......
Regards,
E
Here I am with a very basic problem based on under standing the models, boundary condition and sub domain settings.
I want to simulate a simple semiconductor resistor and measure the I-V characteristics. the attached fig sows the arrangement. Guys please suggest the model, boundary conditions and the sub domain settings. Do I need the convection diffusion model?
Please guys some thoughts on this.......
Regards,
E
Attachments:
2 Replies Last Post 2010年11月28日 GMT-5 14:05
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
it does not look like that your appeal to the "Guys" is very succssful ]
So from an"old" guy: if you replace the semiconductor by a normal limited conductivity material it's probably rather trivial, try as is, and as a starting point it's a good exercice.
Then perhaps you should challenge the community with some more on the physics you intend to study therein for your semi-conductor material case
--
Good luck
Ivar
it does not look like that your appeal to the "Guys" is very succssful ]
So from an"old" guy: if you replace the semiconductor by a normal limited conductivity material it's probably rather trivial, try as is, and as a starting point it's a good exercice.
Then perhaps you should challenge the community with some more on the physics you intend to study therein for your semi-conductor material case
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
hah
Thanx Ivar.......... u r the BEST!!
Thanx Ivar.......... u r the BEST!!