Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

import boundary condition

Posted 2016年6月15日 GMT-4 08:47 Modeling Tools & Definitions, Parameters, Variables, & Functions Version 5.2 2 Replies

Giovanni Langella
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everyone,

I would like to import data from an external file and use it as a boundary condition on a surface. Does anyone have idea how to do it?
The external data are temperatures in prescribed points (x,y) on a regular grid. I would like to use this temperature distribution as a boundary condition on one surface.

Thanks,
GL
2 Replies Last Post 2016年6月15日 GMT-4 10:38
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年6月15日 GMT-4 10:23
Yes, it's easy, see the section on interpolation functions in the Reference Manual for COMSOL Multiphysics version 5.2, page 270 and following. All manuals can be accessed through File > Help > Documentation.
Best regards,
Jeff
Yes, it's easy, see the section on interpolation functions in the Reference Manual for COMSOL Multiphysics version 5.2, page 270 and following. All manuals can be accessed through File > Help > Documentation. Best regards, Jeff
Giovanni Langella
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年6月15日 GMT-4 10:38
Thanks, solved!
Thanks, solved!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content