Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Particle tracing problem
Posted 2016年7月10日 GMT-4 11:15 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
When I try to track particles in a 2D separation device, particles with a diameter larger than the inlet width can somehow pass through. I set it to 1 particle to enter uniformly distributed at a certain time. How is this possible and what am I doing wrong. I make use of two seperate studies, in the first I compute my laminar flow with a diluted species. In the second one I solve particle tracking (in the solver configurations of study 2 I select 'values of variables not solved for' and select study 1 in the drop down menu).
Best regards
When I try to track particles in a 2D separation device, particles with a diameter larger than the inlet width can somehow pass through. I set it to 1 particle to enter uniformly distributed at a certain time. How is this possible and what am I doing wrong. I make use of two seperate studies, in the first I compute my laminar flow with a diluted species. In the second one I solve particle tracking (in the solver configurations of study 2 I select 'values of variables not solved for' and select study 1 in the drop down menu).
Best regards
1 Reply Last Post 2016年7月13日 GMT-4 07:07
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Dear Emiel,
Please address you post directly to: support@comsol.com
Best,
François Mandias
Please address you post directly to: support@comsol.com
Best,
François Mandias