Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

question about the inertial term expression in Navier-Stokes equation

Posted 2017年3月6日 GMT-5 15:58 Fluid & Heat, Parameters, Variables, & Functions Version 5.0 2 Replies

John Zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I have a question about the inertial term expression in COMSOL.

As we know, the inertial term in Navier-Stokes equation is rho*u*del(u), rho is density, u is velocity vector.

While in COMSOL, the inertial term is written as rho*(u*del)u.

These two expressions are different.

Is there something wrong with the expression in COMSOL?

I am very appreciated that if you can answer my question.

Many thanks,

John
2 Replies Last Post 2017年3月7日 GMT-5 08:49
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年3月7日 GMT-5 01:40
Hi,

You can find both versions in the literature. The form is slightly more explicit with respect to where the contraction (in the tensor sense) appears.

If you consider the index form, this term is . Without the parenthesis it requires a little more thinking not to end up in .

By the way, if you look at Wikipedia, you will find the form with parenthesis. en.wikipedia.org/wiki/Navier%E2%80%93Stokes_equations

Regards,
Henrik
Hi, You can find both versions in the literature. The form [math] (\mathbf u \cdot \nabla) \mathbf u [/math] is slightly more explicit with respect to where the contraction (in the tensor sense) appears. If you consider the index form, this term is [math] \rho u_j u_{i,j}[/math]. Without the parenthesis it requires a little more thinking not to end up in [math] \rho u_j u_{j,i}[/math]. By the way, if you look at Wikipedia, you will find the form with parenthesis. https://en.wikipedia.org/wiki/Navier%E2%80%93Stokes_equations Regards, Henrik
John Zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年3月7日 GMT-5 08:49
Hi Henric,

Thanks for your explanation.

The inertial term is (u*del)u, not u*del(u).

Many thanks,

John
Hi Henric, Thanks for your explanation. The inertial term is (u*del)u, not u*del(u). Many thanks, John

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content