Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

AC/DC model: Matrix has zero on diagonal.

Posted 2011年2月14日 GMT-5 08:48 Low-Frequency Electromagnetics Version 4.1 4 Replies

Massimo Bechis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everybody.
I have to calculate the magnetic field around three cables.
The model I built simply includes the three straight conductors and air around them.
A small voltage difference is applied and the Electric Currents module is first run to compute the current flowing in each conductor.

After that I run the Magnetic Felds module, but Comsol returns the following error message:

"Failed to find a solution.
Matrix has zero on diagonal.
Returned solution has not converged."

I'v done many attempts to solve the problem changing the mesh, the way model geometry is built, and even the type of solver, without success.
Could anyone suggest aternative approaches?

Thanks

Massimo
4 Replies Last Post 2013年5月20日 GMT-4 04:31
COMSOL Moderator

Hello Massimo Bechis

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Chatra Prisandi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月19日 GMT-4 13:59
I have this problem too.. Please help us to solve this error.
What part that we have to check and revise?

Regards,

Chatra
I have this problem too.. Please help us to solve this error. What part that we have to check and revise? Regards, Chatra
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月23日 GMT-4 08:23
Hi

why are you using those two physics, first of all the result from EC in your case is a constant current flow that you could easily enter directly into he MF, no need for the EC.

And if you really want to solve for both V and A, then use the MEF physics

There are some similar application names in 3.5

--
Good luck
Ivar
Hi why are you using those two physics, first of all the result from EC in your case is a constant current flow that you could easily enter directly into he MF, no need for the EC. And if you really want to solve for both V and A, then use the MEF physics There are some similar application names in 3.5 -- Good luck Ivar
Mladen Zec
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年11月29日 GMT-5 09:29
Hello,

you can just change the conductivity of the air domain to some small finite value compared to the used copper.

Best regards,
Mladen
Hello, you can just change the conductivity of the air domain to some small finite value compared to the used copper. Best regards, Mladen
saiwing bin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年5月20日 GMT-4 04:31
this method really works
this method really works

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content