Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Applying a measured magnetic flux density to a model in Comsul
Posted 2017年6月30日 GMT-4 05:02 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I measured the magnetic flux desity between two electromagnets in laboratory. Its about 1 Tesla.
Now I want to apply this measurements to my model in Comsul.
I used the "magnetic field, no currents"-Solver and added "Magnetic Flux Conservation".
Unfortunately there is no way to apply the measured magnetic flux density [T] to the model. I can use "Magnetization" [A/m] or "Remanent flux density " [B_r]. But this is not that what i am looking for.
Two month ago there was a user who had the same Issue, unfortunately nobody helped him.
www.comsol.com/community/forums/acdc-module/thread/138061/
Is there anyone who can help me/us?
Many thanks in advance !
I measured the magnetic flux desity between two electromagnets in laboratory. Its about 1 Tesla.
Now I want to apply this measurements to my model in Comsul.
I used the "magnetic field, no currents"-Solver and added "Magnetic Flux Conservation".
Unfortunately there is no way to apply the measured magnetic flux density [T] to the model. I can use "Magnetization" [A/m] or "Remanent flux density " [B_r]. But this is not that what i am looking for.
Two month ago there was a user who had the same Issue, unfortunately nobody helped him.
www.comsol.com/community/forums/acdc-module/thread/138061/
Is there anyone who can help me/us?
Many thanks in advance !
1 Reply Last Post 2017年7月10日 GMT-4 06:14
Please login with a confirmed email address before reporting spam
Posted:
7 years ago
Any Ideas?
... I still got this Problem.
... I still got this Problem.