Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
The Wrench simulation in the library
Posted 2011年3月11日 GMT-5 10:09 Version 4.1 0 Replies
Please login with a confirmed email address before reporting spam
Hi,
I opened the file "the wrench simulation" that is in the library of COMSOL 4.1, and I did the following:
in "Study" right-click and then left-click in "Compute" and it is suppose that the model should run in the right way, however the next message appears:
The following feature has encountered a problem:
-Feature: Stationary solver 1 (sol1/s1)
-Error: Failed to find a solution.
What does it means? What is the problem? Is there an error with "the wrench simulation" that came with the COMSOL 4.1 ?
Regards,
Hello Raul Rodriguez
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.