Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

width of a lumped port

Posted 2017年9月16日 GMT-4 08:17 Low-Frequency Electromagnetics, RF & Microwave Engineering Version 5.3 1 Reply

John
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

In the coax dipole tutorial, why is the width of lumped port 2.pi.R ? Shouldnt it be 2.R ??

1 Reply Last Post 2017年9月18日 GMT-4 13:27
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2017年9月18日 GMT-4 13:27

The "height" of the lumped port is the distance between the two conducting boundaries (R_outer - R_inner) of the port. The "width" of the port is the distance along an equipotential between those boundaries, In this case, that's a circle.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
The "height" of the lumped port is the distance between the two conducting boundaries (R_outer - R_inner) of the port. The "width" of the port is the distance along an equipotential between those boundaries, In this case, that's a circle.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content