Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Status of study/solution with MATLAB Live Link

Posted 2011年3月25日 GMT-4 09:50 Interfacing Version 3.5a, Version 4.1 3 Replies

David Hodgson
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I can't figure out how to determine the status of a study or solution in MATLAB. Basically I want to be able to tell if the study has run or needs to be rerun because of changes in the model. It's easy to check the status of a mesh:

String status = model.mesh(<tag>).feature(<ftag>).status()

What am I missing?
3 Replies Last Post 2011年8月4日 GMT-4 08:50
Peter Sohl
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年3月25日 GMT-4 09:59
Hi,

Have you tried:
ModelUtil.showProgress(true); ?

Regards,

Peter.
Hi, Have you tried: ModelUtil.showProgress(true); ? Regards, Peter.
David Hodgson
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年3月25日 GMT-4 10:26
Thanks for the reply. I think I need to explain what I am trying to do a little better.

I'm creating a MATLAB gui that will guide the user through the simulation of a few specific parts. I want the user to be able to save their progress.

Basically I want to be able to load a model file or pull a model of off the server and be able to determine what the status of the model is. Things like: has the mesh been built? Have the studies been run? has the model changed since the study was run?

Thanks for the reply. I think I need to explain what I am trying to do a little better. I'm creating a MATLAB gui that will guide the user through the simulation of a few specific parts. I want the user to be able to save their progress. Basically I want to be able to load a model file or pull a model of off the server and be able to determine what the status of the model is. Things like: has the mesh been built? Have the studies been run? has the model changed since the study was run?
Stefan Eidelloth
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年8月4日 GMT-4 08:50
Hi David,
I dont have a solution to your issue and the post is some time ago,
but maybe you are interested in my Matlab GUI for controlling Comsol:
www.comsol.com/community/exchange/134/

Sunny regards,

Stefan

Hi David, I dont have a solution to your issue and the post is some time ago, but maybe you are interested in my Matlab GUI for controlling Comsol: http://www.comsol.com/community/exchange/134/ Sunny regards, Stefan

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content