Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

beam - 3D solid connection

Posted 2018年2月23日 GMT-5 01:32 Structural Mechanics Version 5.2 2 Replies

Varsha Kotha
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I have modelled rail as beam and sleepers as 3D solid and I need to connect rail to sleepers. there is no option available in comsol to connect beam with 3D solid. I need any other alternative.

Regards Varsha

2 Replies Last Post 2018年2月26日 GMT-5 01:33
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2018年2月23日 GMT-5 01:45
Updated: 7 years ago 2018年2月23日 GMT-5 01:46

Hi Varsha,

If you are running the latest version (5.3a) you can use the Solid-Beam Connection multiphysics coupling.

https://www.comsol.com/release/5.3a/structural-mechanics-module

If not, you probably need to use an extrusion coupling operator, and then a Prescribed Displacement node in the Solid Mechanics interface in which the displacements are set to match those in the beam.

Regards,

Henrik

-------------------
Henrik Sönnerlind
COMSOL
Hi Varsha, If you are running the latest version (5.3a) you can use the Solid-Beam Connection multiphysics coupling. If not, you probably need to use an extrusion coupling operator, and then a Prescribed Displacement node in the Solid Mechanics interface in which the displacements are set to match those in the beam. Regards, Henrik
Varsha Kotha
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2018年2月26日 GMT-5 01:33

Hi Henrik,

Thank you for your help

Regards Varsha

Hi Henrik, Thank you for your help Regards Varsha

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content