Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Interaction between matlab and comsol
Posted 2009年11月18日 GMT-5 10:03 1 Reply
Please login with a confirmed email address before reporting spam
I m building a segregated program that use RF and structural module
Is it possible the modify the result given by the RF module (Group1) in matlab before it is used by the structural module (group2) and how it can be done
Is it possible the modify the result given by the RF module (Group1) in matlab before it is used by the structural module (group2) and how it can be done
1 Reply Last Post 2009年11月18日 GMT-5 17:09
Please login with a confirmed email address before reporting spam
Posted:
2 decades ago
Hi
from my undestanding, this can only be done if you are controlling COMSOL fully from Matlab, then everything is possible (the old FEMLAB way of doing things).
I would start to read the mlinterface.pdf document, start with some of the simpler cases
Good luck
Ivar
from my undestanding, this can only be done if you are controlling COMSOL fully from Matlab, then everything is possible (the old FEMLAB way of doing things).
I would start to read the mlinterface.pdf document, start with some of the simpler cases
Good luck
Ivar