Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Deviations from calculations-simulation-tests
Posted 2011年5月4日 GMT-4 03:47 1 Reply
Please login with a confirmed email address before reporting spam
Hi
How exactly match the calculated values with simulated as well as determined by tests? I am particularly interested in values of magnetism, respectively magnetic fields of permanent magnets.
Thanks
How exactly match the calculated values with simulated as well as determined by tests? I am particularly interested in values of magnetism, respectively magnetic fields of permanent magnets.
Thanks
1 Reply Last Post 2011年5月5日 GMT-4 08:56
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I would sa there is no defintive answer.
You can get within a few percent (then mostly I'm happy), if you leave your supercomputer run longer within a few ppm.
But this applies only to the equivalence of your model to the results of this simplfied model.
If you are ignoring a full physicsal branch taking place for your measured values, then you may be >100% off too ;)
--
Good luck
Ivar
I would sa there is no defintive answer.
You can get within a few percent (then mostly I'm happy), if you leave your supercomputer run longer within a few ppm.
But this applies only to the equivalence of your model to the results of this simplfied model.
If you are ignoring a full physicsal branch taking place for your measured values, then you may be >100% off too ;)
--
Good luck
Ivar