Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

HTC calculation

Posted 2011年6月27日 GMT-4 05:36 Heat Transfer & Phase Change Version 4.1, Version 4.2 7 Replies

alirod
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I'm trying to simulate a model of heat transfer between two solids.
I have, through experimentation, data on the variation of temperature at different points, density, etc.
Is it possible to calculate with Comsol the Coefficient of Heat Transfer (h) from these data?.
I work with Comsol 4.1: Could you please recommend the best module for this model?.
Thanks
7 Replies Last Post 2013年2月14日 GMT-5 08:56
Edgar Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年6月27日 GMT-4 07:14
Alicia,

I would suggest the heat transfer module. However, thermal conductivity is a parameter in the model, not a dependent variable that is solved for. I see two possible approaches:

You can do a parameter study of thermal conductivity and see which value fits your measurement best.

Another approach would be to re-write the PDEs in order make the parameter into the dependent variable and use your measurent data as boundary conditions.

Cheers
Edgar
Alicia, I would suggest the heat transfer module. However, thermal conductivity is a parameter in the model, not a dependent variable that is solved for. I see two possible approaches: You can do a parameter study of thermal conductivity and see which value fits your measurement best. Another approach would be to re-write the PDEs in order make the parameter into the dependent variable and use your measurent data as boundary conditions. Cheers Edgar
alirod
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年6月28日 GMT-4 07:09
Thank you for you reply!!

One question: If I decide to re-write the PDE, Should I use the "PDE Interface" module or is there some way to do it in the "Heat Transference Module".

Thanks a lot,
Alicia
Thank you for you reply!! One question: If I decide to re-write the PDE, Should I use the "PDE Interface" module or is there some way to do it in the "Heat Transference Module". Thanks a lot, Alicia
Edgar Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年6月28日 GMT-4 07:25
Alicia,

I am not completely sure but I don't think it is possible to modify the equations in the application modules.

So you probably need to do it in the PDE module. If I am wrong, I ask the forum to correct that.

Cheers
Edgar
Alicia, I am not completely sure but I don't think it is possible to modify the equations in the application modules. So you probably need to do it in the PDE module. If I am wrong, I ask the forum to correct that. Cheers Edgar
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年6月28日 GMT-4 08:55
Hi Edgar,
It is possible to modify the pre-implemented equations. One way consists in modifying the weak expressions in the Equation View. You will need to turn on the Equation View first. In v4.2 you can do that through Options>Preferences>Show (if you want to do this permanently) or alternatively through the Show button located near the top right corner of the Model Builder window (if you want this turned on only for the current model).
Jeff
Hi Edgar, It is possible to modify the pre-implemented equations. One way consists in modifying the weak expressions in the Equation View. You will need to turn on the Equation View first. In v4.2 you can do that through Options>Preferences>Show (if you want to do this permanently) or alternatively through the Show button located near the top right corner of the Model Builder window (if you want this turned on only for the current model). Jeff
Ed Frank
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年2月13日 GMT-5 14:54

Hi Edgar,
It is possible to modify the pre-implemented equations. One way consists in modifying the weak expressions in the Equation View. You will need to turn on the Equation View first. In v4.2 you can do that through Options>Preferences>Show (if you want to do this permanently) or alternatively through the Show button located near the top right corner of the Model Builder window (if you want this turned on only for the current model).
Jeff


Can you give an example? I'd like to modify the electroneutrality equation in the NP interface. When I look under "Equation view" I see 7 entries in the variables table and the tables for shape functions, weak expressions, and constraints, are empty.
[QUOTE] Hi Edgar, It is possible to modify the pre-implemented equations. One way consists in modifying the weak expressions in the Equation View. You will need to turn on the Equation View first. In v4.2 you can do that through Options>Preferences>Show (if you want to do this permanently) or alternatively through the Show button located near the top right corner of the Model Builder window (if you want this turned on only for the current model). Jeff [/QUOTE] Can you give an example? I'd like to modify the electroneutrality equation in the NP interface. When I look under "Equation view" I see 7 entries in the variables table and the tables for shape functions, weak expressions, and constraints, are empty.
Ed Frank
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年2月13日 GMT-5 15:17
Oh, wait. I was looking in the wrong equation node. Looks like I need to understand the test() operator in COMSOL.
Oh, wait. I was looking in the wrong equation node. Looks like I need to understand the test() operator in COMSOL.
Niklas Rom COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年2月14日 GMT-5 08:56
I think this model does exactly what Alicia wants to do:
www.comsol.com/showroom/gallery/3903/
Niklas


Hi,
I'm trying to simulate a model of heat transfer between two solids.
I have, through experimentation, data on the variation of temperature at different points, density, etc.
Is it possible to calculate with Comsol the Coefficient of Heat Transfer (h) from these data?.
I work with Comsol 4.1: Could you please recommend the best module for this model?.
Thanks


I think this model does exactly what Alicia wants to do: http://www.comsol.com/showroom/gallery/3903/ Niklas [QUOTE] Hi, I'm trying to simulate a model of heat transfer between two solids. I have, through experimentation, data on the variation of temperature at different points, density, etc. Is it possible to calculate with Comsol the Coefficient of Heat Transfer (h) from these data?. I work with Comsol 4.1: Could you please recommend the best module for this model?. Thanks [/QUOTE]

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content